Radiolink R6DS, 2.4G 6 channels receiver, DSSS and FHSS spread spectrum working simultaneously, use with Radiolink transmitters AT9, AT9S and AT10. SBUS, PPM and PWM signal can work at the same time.

Two Signal Models:

1. PWM Signal Mode：Red LED indicates PWM signal output, 6 channels in Total.
2. SBUS/PPM & PWM Signal Mode: Blue/Purple LED indicates SBUS/PPM signal output, CH1 output PPM signal, and CH2 output SBUS signal, CH3 output CH3 PWM signal(for helicopter) and CH4 to CH6 output CH8 to CH10 independent PWM signal simultaneously, 10 channels in Total.

Switching SBUS/PPM and PWM Modes:

  Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to SBUS/PPM. The red LED indicates the normal PWM and blue/purple indicates SBUS/PPM. 

Features:

• DSSS&FHSS for the best interference rejection.
• Output SBUS, PPM and PWM signals simultaneously.
• Top speed response, 3ms for all channels parallel.
• Top precision 4096, 0.25us every bit insure every servo stable.
• Sub miniature size, Weight 3.4 grams, never burden to your drones, best choice for light drones.
• All channels response parallel, totally 3ms.
• Specially used for light drones, compatible with all flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D etc.
• One single cable connect with the flight controller, easy setting

Specifications:

• Channels: 6 ~ 10 (can be extetded to 10 channels)

•  

  Power input: Max 6V

•  

  Control distance: 600 meters Air

•  

  Current consumption: 38-45mA (5V)

•  

  Size: 25*15mm

•  

  Weight: 3.4 grams

•  

  Precision: 4096